Push-Pull Unit SPPU-LW
The Skidding System push-pull unit - fitted with a cylinder with equal pushing and pulling capacity - pushes or pulls the beam with the load in the correct horizontal position. With a handle on the push-pull unit the push or pull direction can be switched in a split of a second. The return line of the cylinders is internal, which significantly reduces the chances of this being damaged.
- Specifications
-
Details Articlenumber 100.003.366 Basic specifications model SPPU-LW max. working pressure 720 / 72 (bar/Mpa) 10443 psi Performance tonnage 10 t 22046 lb stroke 330 mm 13 in capacity (press) 101.3 kN / 10.3 t / 101.3 / 10.3 (kN/t) 22773 lbf capacity (retract) 93.9 kN / 9.6 t / 93.9 / 9.6 (kN/t) 21110 lbf effective pressure area (press) 32.66 cm2 5.1 sq. in. effective pressure area (retract) 13.54 cm2 2.1 sq. in. General specifications required oil content (press) 1078 cc 36.5 oz required oil content (retract) 447 cc 15.1 oz acting type double return type hydraulic material steel Dimensions, weight and temperature weight, ready for use 26 kg 57.3 lb Technical drawing dimensions dimension A 637 mm 25.1 in dimension B 264 mm 10.4 in dimension C 233 mm 9.2 in - Features
-
- • 200-ton capacity (2 X 100 t)
- • Push-pull cylinder with equal capacity for both pushing and pulling
- Ability to push or pull the load into position, instead of only pushing
- Accurate control in both directions - • Change of direction by the use of a handle; push or pull direction can be switched in a split of a second
- • Internal return line in push-pull cylinder
- Reduces the chance of damage to the line
- Equal hose length for ingoing and outgoing oil - • Safe; integrated safety features in the push-pull cylinder for protection against
- • Lightweight components with optimally placed grips
- Easy to carry, handle, position and assemble by one or two persons (no forklift needed)
- Reduces the physical burden
- Maximum performance at a minimum weight
- Downloads
-
