Motorsport Rescue Set Rally
The Rally set is a comprehensive set of rescue equipment. It is similar to the kit that is used by public rescue organizations to deal with road traffic accidents. Most rally races take place off-track and in remote locations. With this selection of rescue tools you will be prepared for all possible scenarios that might occur during a rally race.
Whether you need to cut, spread, push apart, stabilize or protect, this motorsport rescue set has everyting you need. It includes a battery-powered cutter, spreader and telescopic ram with an extension pipe and a cross support set for crossramming, a pedal cutter with handpump, a glass cutter, 2 vehicle stabilization struts, 2 sets of stabilization blocks and wedges, a patient protection shield and a set of sharp edge protection covers.
Standard supplied with:
-
Required accessories such as batteries and chargers for the Pentheon cutter, spreader and ram. For an overview of all available accessories, pleas click through to the product pages of each product listed under 'Set Components'.
- Specifications
-
Details Articlenumber MRS-RLY Basic specifications model Rally max. working pressure 720 / 72 (bar/Mpa) 10443 psi - Features
-
- V-Struts provide quick and easy vehicle stabilization
- Ideal for rescue operations in rally racing, where there's a high chance of a car ending up in an unsafe position (on its side or roof) on uneven terrain. - Powerful ram for use after a side impact when the car has been deformed and the construction needs to be pushed back
- Proven solution for space creation around the driver in order to remove the entrapment.
- With extension pipe to bridge larger gaps or create a bigger opening. Also ideal for use in cross ramming applications. - Smart Ram Extension
- As soon as you connect the optional extension pipe, the ram will detect this and automatically adapt its maximum force to the new length that can be achieved. So you can safely continue your job. - Cross Ram Support Set for cross ramming
- To spread the load of the ram over a larger area, which will prevent it from pushing through the car construction.
- With grip teeth on both sides of each ram support for optimal hold. - Inclined Cutter with New Car Technology blades
- Offers you a great cutting performance on rollcage tubes, which need to be out of your way to create a big extraction opening.
- The 30-degree inclined cutter jaw leaves more working space between the body of the tool and the car / your patient, which is safer. - Spreader with Extreme Grip Spreading Tips for space creation
- The ideal tool to bend, or push away, deformed parts of the race car to create the space required for driver extraction.
- Lots of pointed teeth on the inside and outside of the tips bite into the material for superior grip. - Cutter, spreader and ram equipped with innovative Pentheon Technology
- Unparalleled speed thanks to Stepless Speed Maximization. Where all other rescue tools show a significant decrease in speed when switching to another stage to deal with higher loads, Holmatro Pentheon tools stick to the ideal stepless speed curve.
- With two-mode control handle for ultimate control. Choose between the tool’s high-speed and low-speed modes at any time during the rescue operation.
- Battery management made easy with On-Tool Charging. Leave the battery on the tool, connect the tool to the charger and the whole charging process will regulate itself. The battery on the tool had priority over the one on the charger, which will resume charging when the battery on the tool is 100% full.
- V-Struts provide quick and easy vehicle stabilization
- Set components
-
- Downloads
-
